DonnyFL @ New England Airgun
|
|
Airforce Texan .50 (18.83 & 19.1mm)
Finally an answer to the Airforce Texan line up.
- Made of steel
- M18x1 threads compatible with .357 Ronin or Emperor with M18x1 endcap
- Comes with black anodized Aluminum thread protector
- Adapters are tight fit and has two set screws (M4) to help secure it onto the barrel
- Very tight fit, may require some sanding inside the adapter
- Uses 2mm hex keys for set screws
Please measure your barrel OD to select the correct size.
Two sizes for .50 (please use a caliper and measure your barrel's outer diameter)
.50 = 18.83 mm
.50 = 19.1 mm
1.22 x 5 inches TANTO
Only a few left!
Tanto had been the missing member of the DonnyFL collection. It's a shorter version of the KOI but don't let the size fool you, it does really well even on high powered guns.
Features:
- Available in .22 .25 and .30
- Mono-core design
- Precision CNC’ed by professional machinist
- Sand blasted and anodized for maximum durability
- Swappable rear end caps
- Comes pre-wrapped in felt
- Machined grooves on the outside for easy handling
- Tanto with cone end cap is 5.37 inches long
- Comes with protective red tube for easy transport and storage.
Air Venturi Avenger Extender 1/2 x 20 Adapter
Sold out
This version allows you to use a larger suppressor than the Tanto or KOI without having to remove it to fill the gun. Also redesigned to slide over the barrel to keep the barrel centered with the adapter. This reduces the chance of pellet clipping and improves accuracy.
Features:
- 6061 Aluminum T6
- Black anodized
- 1/2 x 20 male threads
Benjamin .357 Bulldog M18x1 with thread protector
Only a few left!
The new adapter have finally arrived. This new design goes back to the barrel and slides over the barrel bushing. This will keep the barrel aligned with the adapter's exit hole. Please note that the barrel bushing is not included.
When putting this on, press the adapter into the shroud as you tighten the two screws. This will ensure the adapter is flush with the shroud.
The .357 Benjamin Bulldog is becoming popular for big game hunting. Add this adapter and pair it up with a .357 Ronin or .357 Emperor to make it the ultimate hunting airgun
.
- Made by CNC for accuracy
- Very easy to install. Remove the top and bottom screw securing the front cap and swap it out for this adapter. Screw the two screws back in and you're done. No need to remove the shroud.
- Matte Black anodize
- Knurled thread protector
Benjamin Marauder Pistol (Prod) Adapter with thread protector
Only a few left!
Want to make your Prod quieter? You'll need this 1/2 x 20 adapter that will screw into the OEM shroud. The threads that screws into the shroud is 11/16 - 24.
The .25 works great with the .22 and reduces the chance of pellet clipping. However, in order to fill this gun with the Sumo, you'll have to remove the suppressor. An alternative is to go with either the Tanto or KOI with cone rear cap.
*Highly recommend going with a caliber one size up to reduce the chance of pellet clipping.
Features:
- Made by CNC for accuracy
- Material is 6061 T6 Aluminum
- Black anodize
- Diamond pattern knurling for easy grip
10mm, 11mm, 14mm, 15mm and 16mm Slide On Adapter with 1/2 x 20 UNF
Only a few left!
Have an airgun that does not have a shroud and would like to be able to add an airgun moderator? These slide on adapters works on airguns with barrel sizes 10mm, 11mm, 14mm, 15mm and 16mm.
*Make sure to get a suppressor one caliber size above what your gun is. Still very effective and reduces the chance of pellet clipping.
Features:
- Compatible with .177 to .25
- Made by CNC for accuracy
- Material is 6061 T6 Aluminum
- Black anodize
- Diamond pattern knurling for easy grip
- Comes with M4 set screws
- Uses 2mm Allen keys
Sumo/Tatsu/Shogun Endcaps
Only a few left!
1/2 x 20
Interchangeable rear endcaps for the latest model of Sumo, Tatsu and Shogun. Works with models with the grooves in the front cap.
2 x 6.25 inch RONIN
Only a few left!
.357 Big Bore (M18x1)
Ronin is big and bold, and that's how we love him. Maybe a little overkill for the .177 and .22 but it looks so awesome!
- Mono-core design to increase accuracy and limit the chances of pellet clipping
- No moving parts or epoxy that may become loose after 1000's of rounds
- Precision CNC'd by professional machinist
- Sand blasted and anodized for maximum durability
- Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed when you want to perform maintenance inside the unit.
- Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials. Comes pre-wrapped in felt
- Machined grooves on the outside for easy handling.
- Weighs around 10.4 oz
- Comes with protective red tube for easy transport and storage.
Ronin/Emperor Endcaps
Only a few left!
Interchangeable rear endcaps for the latest model of Ronin and Emperor. Works with models with the grooves in the front cap.
1.22 x 7 inches KOI Suppressor
Only a few left!
- Available in .22 and .25
- Mono-core design
- Precision CNC’ed by professional machinist
- Sand blasted and anodized for maximum durability
- Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt or 1/2 x 20 Cone
- Comes pre-wrapped in felt
- Machined grooves on the outside for easy handling
- Comes with protective red tube for easy transport and storage.
